AQT Anti-limescale

AQT Anti-limescale

AQT Anti-limescale prevents problems caused by hard water. Anti-limescale prevents limescale deposits on the walls. Does not increase the amount of minerals and leaves the pH unchanged. Without phosphates or nitrogen.

Anti-limescale is a strong cleaning agent that you can also use for sanitary purposes. This product is recommended for use in hard water areas and in wet areas where there are problems with limescale.
The product is based on citric acid.

Lime settling can be stubborn and is usually linked to too high water hardness or imbalanced alkalinity. Water hardness can be lowered by diluting the pool water or adding soft water. You can dilute the pool water by rinsing the sand filter. Alkalinity can lower you with Alkalinity lower.

How can you measure the water hardness?

If you want to know whether you should add anti-limescale or not, it is best to test your swimming pool water first. The 6 in 1 test strips also measure the total hardness. If this value is too high, it is best to add anti-limescale. Usually the problem of limescale is linked to a too high pH value. You can also measure the pH value with these test strips. You can lower this pH with pH min.

INSTRUCTIONS

Add 1L anti-limescale per 10m³ once a year. When the water hardness is > than 35°F, a supplementary treatment in season is recommended (1/2L per 10m³)

For sanitary purposes:
Dose 25 ml in a bucket with 5 l of water.
Note : Do not apply to calcareous floors
such as natural stone or marble.