Hanna Chlorine dosing pump redox BL101

Hanna Chlorine dosing pump redox BL101-10

the Hanna BL101 dosing pump is self-contained and will automatically monitor and adjust the chlorine value of the swimming pool based on a redox measurement (probe).

Characteristics

Peristaltic dosing pump

The BL101-10 features a built-in peristaltic chemical feed pump. This works with a stepper motor without gears or brushes, which ensures a long life and little maintenance.
A detailed description of the supplier: Hanna Chlorine dosing pump

Electrode with quick coupling

Range from -2000 to 2000 mV, -5.0 to 105°C

adjustable flow rate

You can adjust the flow rate of the dosing pump from 0.5 to 3.5 l/h. For example, you can apply this pump to a large swimming pool or a jacuzzi.
The adjustable flow rate provides better control in maintaining the desired set point.

proportional dosing

The peristaltic dosing pump can be used with a simple on/off function or with a proportional control that prevents the set point from being exceeded.
This will cause the dosing pump to run slower/faster depending on the set point. This way you can be very safe liquid chlorine dosing in the pool.

programmable alarms

An alarm provides extra safety against overdosing. The system will shut down if it does not reach its value within the preset dosing time.

multi-color screen

The BL101 is equipped with a multi-colored LCD screen that makes it possible to easily read the status of the pool controller. In operating mode, the display is green. When the control is not enabled, the display is light green and in an alarm state the display flashes red.

Mounting kit included directly in duct – BL101

• ORP & temperature electrode
• Suction filter
• Injector 1/2″ thread
• tapping saddle 50 mm (2x)
• PVC suction hose (chlorine bottle → pump)
• PE rigid dosing hose (pump → injection tip)
• ORP test solution
• power cable
• instrument and electrode quality certificates
• Manual

How does the Hanna BL101 measure its value?

This system includes a redox probe that you directly in your leadership can assemble. The tapping saddle D50 is included for this.
It is also possible to do this in one measuring chamber to install. This is not included in the package. But allows multiple measurements to be made at one point.

Which products do you need?

You use the dosing pump Hanna BL101 to monitor the chlorine correction. You have a bus for this liquid chlorine needed to inject.

Maintenance dosing pump

There are certain parts that you should inspect annually and replace if necessary.
→ Probe
→ peristaltic tube
→ Injection points

concrete benefits automatic pH correction

• Stable measurement
• Accurate
• Easier
• Better water quality & Hygiene