Vesuvio Full Inverter
The Vesuvio Full Inverter heat pump is equipped with the very latest technology in the field of heat pumps, compressors and fans. This in combination with the latest intelligent control techniques.
This heat pump combines intelligent software with continuous and optimal efficiency. The full inverter heat pump automatically regulates the heat output between 25% and 100%, depending on the demand of the pool water. Most of the time, the heat pump will run at medium or low speed for optimum efficiency. If the full inverter heat pump runs at medium or low speed, the swimming pool temperature remains constant.
The sound of the heat pump is very low in this situation. The Vesuvio heat pump has an average efficiency (COP) between 6 and 8. And this at an air temperature of 15˚C, water temperature of 26˚C and a humidity of 70%. The full inverter heat pump is the most energy-efficient solution with optimal comfort!
The correct sizing of the cable section is essential for the installation of a heat pump. It often happens that the distance between the heat pump and the electrical supply is too great (30 to 50 meters and more). This results in a voltage drop, caused by a weak dimensioning of the cable. This results in increased current and difficulty in starting up. A correct cable section is therefore necessary, taking into account the power consumed and the length of the supply cable.
Advantage full inverter heat pump compared to on/off heat pump:
The traditional and most commonly used heat pumps are equipped with an on/off compressor. This compressor is running 100% or stopped. As a result, the ratio between evaporator (exchange heat with the outside air) and the condenser (heat release to swimming pool water) is always in the same proportion.
The existing fan also has the property on/off. Due to the on/off properties, the noise production has a fixed value and the maximum efficiency that is achievable is a COP of approximately 5.
TIP : we collected all the information on the pool heat pump info page.
- adjusts its power and consumption according to the pool needs
- compressor “full inverter” with steps per 1 Hz
- sound pressure at 10 m to less than 20 dB (for the VESIN110 model)
- integrated soft start to avoid overload when starting the device
- operation from -7C° allows a wide period of use
- 3 settings : warm, cold, hot/cold automatic
- complete range for swimming pools from 35m³ to 140m³
- defrosting thanks to reversible cycle
- electronic expansion
- dimensions : from 844x308x648 to 1161x496x958
- weight : from 40 to 108 kg
- warranty : 3 years !