Hanna pH dosing pump BL100-10
Dosing system to automatically regulate the pH value of the swimming pool.
In-line mounting kit for direct mounting in pipeline.
Peristaltic dosing pump
The BL100 has a powerful built-in peristaltic feed pump that uses a stepper motor with no gears or brushes.
This design ensures a long life and low maintenance.
electrode with quick coupling
Range from 0.00 to 14.00 pH, -5.0 to 105°C
adjustable flow rate
The flow rate of the dosing pump is adjustable from 0.5 to 3.5 l/h. This can be used for a large swimming pool or for a jacuzzi.
This adjustable flow rate provides better control in maintaining the desired set point.
The peristaltic dosing pump can be controlled by a simple on/off or more advanced proportional control that prevents the setpoint from being exceeded.
Proportional control will speed up or slow down the pump depending on the setpoint.
programmable alarms and overdose protection
When an alarm is activated, all dispensing stops. For added safety, the alarm system also provides overdose protection, because if the set value is not corrected within a programmed time interval, the meter will go into alarm status. In this way you can safely liquid pH min dosing in your swimming pool.
The BL100 has a multi-colored LCD screen so you can quickly and efficiently see the status of the controller. In operating mode, the display is green. When the control is not enabled, the display is light green and in an alarm state the display flashes red.
included in BL100
- pH & temperature electrode
- suction filter
- injector 1/2″ thread
- tapping saddle 50mm (2x)
- PVC suction hose (pH bottle → pump)
- PE rigid dosing hose (pump → injection tip)
- pH buffer liquid 4.01 & 7.01
- power cable
- instrument and electrode quality certificates